  
Wire - Page 20
WIRE SIZES EQUIVALENT TO CORRESPONDING 1T,
2T AND 4T HOLES IN VARIOUS HOLE TYPE IQI's |
Plaque Thickness
in. (mm) |
Plaque Thickness
in. (mm) |
Diameter of wire with EPS of hole in plaque, in. (mm) |
1T |
2T |
4T |
0.005 (0.13) |
5 |
|
0.0038 (0.09) |
0.006 (0.15) |
0.006 (0.16) |
6 |
|
0.004 (0.10) |
0.0067 (0.18) |
0.008 (0.20) |
8 |
0.0032 (0.08) |
0.005 (0.13) |
0.008 (0.20) |
0.009 (0.23) |
9 |
0.0035 (0.09) |
0.0056 (0.14) |
0.009 (0.23) |
0.010 (0.25) |
10 |
0.004 (0.10) |
0.006 (0.15) |
0.010 (0.25) |
0.012 (0.30) |
12 |
0.005 (0.13) |
0.008 (0.20) |
0.012 (0.28) |
0.015 (0.38) |
15 |
0.0065 (0.16) |
0.010 (0.25) |
0.016 (0.41) |
0.017 (0.43) |
17 |
0.0076 (0.19) |
0.012 (0.28) |
0.020 (0.51) |
0.020 (0.51) |
20 |
0.010 (0.25) |
0.015 (0.38) |
0.025 (0.63) |
0.025 (0.64) |
25 |
0.013 (0.33) |
0.020 (0.51) |
0.032 (0.81) |
0.030 (0.76) |
30 |
0.016 (0.41) |
0.025 (0.63) |
0.040 (1.02) |
0.035 (0.89) |
35 |
0.020 (0.51) |
0.032 (0.81) |
0.050 (1.27) |
0.040 (1.02) |
40 |
0.025 (0.63) |
0.040 (0.02) |
0.063 (1.57) |
0.050 (1.27) |
50 |
0.032 (0.81) |
0.050 (1.27) |
0.080 (2.03) |
0.060 (1.52) |
60 |
0.040 (1.02) |
0.063 (1.57) |
0.100 (2.54) |
0.070 (1.78) |
70 |
0.050 (1.27) |
0.080 (2.03) |
0.126 (3.20) |
0.080 (2.03) |
80 |
0.063 (1.57) |
0.100 (2.54) |
0.160 (4.06) |
0.100 (2.5) |
100 |
0.080 (2.03) |
0.126 (3.20) |
0.200 (5.08) |
0.120 (3.05) |
120 |
0.100 (2.54) |
0.160 (4.06) |
0.250 (6.35) |
0.140 (3.56) |
140 |
0.126 (3.20) |
0.200 (5.08) |
0.320 (8.13) |
0.160 (4.06) |
160 |
0.160 (4.06) |
0.250 (6.35) |
|
0.200 (5.08) |
200 |
0.200 (5.08) |
0.320 (8.13) |
|
0.240 (6.10) |
240 |
0.250 (6.35) |
|
|
0.280 (7.11) |
280 |
0.320 (8.13) |
|
|
DIN and EN 462-1 : 1994 Wire-Type Image Quality Indicators
Available in Aluminum, Copper, and Steel.
There are four sizes:
1 DIN (containing wires 1 to 7)
6 DIN (containing wires 6 to 12)
10 DIN (containing wires 10 to 16)
13 DIN (containing wires 13 to 19)
Lengths are: 25 mm or 50 mm please specify
|
Wire No. |
19 |
18 |
17 |
16 |
15 |
14 |
13 |
12 |
11 |
10 |
Diam MM |
0.05 |
.063 |
0.08 |
0.10 |
0.125 |
0.16 |
0.20 |
0.25 |
0.32 |
.040 |
Wire No. |
9 |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
— |
Diam MM |
0.50 |
0.63 |
0.80 |
1.00 |
1.25 |
1.60 |
2.00 |
2.50 |
3.20 |
— |
You can navigate our entire catalog by using the pull-down menu at the bottom of each page. We have also provided a clickable table of contents on the JEM Manufacturing home page, as well as back and next buttons to allow you to flip through the catalog.
To place an order you may call 1-508-872-9299. Or, if you wish, please feel free to contact us at jem@theraproducts.com. JEM Manufacturing is an open organization...we welcome all comments, and would love to discuss with you any ideas or thoughts you may have. We at JEM look forward to bringing you the products you need to offer the very best in IQI's and NDE supplies!
  
Copyright 2000 JEM Manufacturing
225 Arlington Street, Framingham, MA 01702-8723
Tel: (508) 872-9299
Fax: (508) 875-2062
jem@theraproducts.com
|